BERTHOLD TECHNOLOGIES LB 8300 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 58

background image

2 Safety manual

Rod source shields LB 8300

14

64217BA2 Rev. 00, 10/2017

2.4.2

Exposure of employees to radiation

During installation, maintenance and decommissioning of the shield, employees

may be exposed to radiation.

In order to keep such exposure as low as possible, the shield with the source may
only be mounted and/or dismounted by authorized employees. Such authorised
staff is to be instructed as regards all rules of behaviour when handling

radioactive substances in advance.

It is to be ensured that the locking mechanism of the shield is closed and secured
in order to prevent the emission of unshielded radiation. Modification or damage
to the shield must be avoided at all times.

Work may only be executed according to the instructions and under the
supervision of the radiation safety officer, who furthermore has to calculate or
estimate the exposure of the employees to radiation in order to ensure that the
statutory dose rate limits are not exceeded.

2.4.3

Theft protection

Radioactive substances or equipment containing radioactive substances must be
secured in a way that they are protected against access by unauthorized persons.
In the case of firmly installed equipment containing radioactive substances, the
protection against unauthorized access is generally provided by the firmly

attached installation.

Shields with radioactive sources which are decommissioned for a certain period of
time must be dismounted and securely stored in a storage room complying with
the national regulations as regards the storage of radioactive substances.

Portable measuring systems must never be left unsupervised. When this
equipment is out of use, it is to be protected against access by unauthorised
persons.

2.4.4

In the case of fire

The shield material can melt and leak from the shield if exposed to very high

temperatures for an extended period of time. During and after a fire, there is a
risk of major long-time consequences for your health due to the incorporation of
lead as well as a risk of increased radiation exposure.

When planning the use of radiometric measuring systems, constructional

measures ensuring fire prevention are to be provided.



In the case of fire, these measures limit the access to this area.



Avoid the incorporation by keeping sufficient distance.



Notify BERTHOLD TECHNOLOGIES of the situation; you will promptly receive

information on immediate measures.

«
...
12
13
14
15
16
...
»

Содержание LB 8300



























































Отзывы:

Нет отзывов

Похожие инструкции для LB 8300

Бренд: Makerfire Страницы: 10

Бренд: Bang & Olufsen Страницы: 2

Бренд: Paia Страницы: 11

Бренд: CAB Страницы: 39

Бренд: CAB Страницы: 27

Бренд: Gamry Instruments Страницы: 69

Бренд: Gamry Instruments Страницы: 30

Бренд: Gamry Instruments Страницы: 88

Бренд: Rayger Страницы: 2

Бренд: jablotron Страницы: 2

AquaPure Ei Series

Бренд: Jandy Страницы: 4

Бренд: janitza Страницы: 30

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

Бренд: Rational Страницы: 16

Бренд: SandenVendo Страницы: 19

Бренд: U-Line Страницы: 3

Бренд: U-Line Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды