BERTHOLD TECHNOLOGIES LB 8300 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 58

background image

2 Safety manual

Rod source shields LB 8300

10

64217BA2 Rev. 00, 10/2017

2

Safety manual

2.1

Proper use

The source with shield is used in connection with a detector and a suitable
evaluation unit provided by BERTHOLD TECHNOLOGIES to measure the radiation

intensity occurring during a radiometric measurement.

The shield was developed as shield/protective container for radioactive sources
and may be used exclusively for this purpose.

Usually, the shield contains a radioactive source. The notes on radiation

protection contained in the present manual as well as any statutory requirements
in this respect are to be strictly adhered to.

The following constitutes proper use:

•

Adhering strictly to the instructions and operation sequences and not
undertaking any different, unauthorised practices which could put your safety
and the operational reliability of the shield at risk!

•

Observing the provided safety instructions!

•

Carrying out the prescribed maintenance measures or having them carried out
for you!

The following constitutes improper use and is to be avoided:

•

Any non-compliance with the present operating manual for the supplied
products

•

Applying conditions and requirements which do not conform to those stated
in the technical documents, data sheets, operation and assembly instructions
and other specific guidelines of the manufacturer.

•

Using the product after any repair carried out by employees who have not
been authorized by BERTHOLD TECHNOLOGIES GmbH & Co. KG.

•

Using the product in a damaged or corroded condition.

•

Dismounting the unit while the radiation beam outlet is open (except for
situations in which the locking mechanism is defective and the beam outlet
can no longer be closed).

•

Operation without the safety precautions provided by the manufacturer.

•

Any modification to design and function, except for any activities provided for
and described in the present manual.

•

Restructuring or changing the system components.

•

Manipulation or avoidance of existing safety equipment.

BERTHOLD TECHNOLOGIES GmbH & Co. KG shall only accept liability for /
guarantee the correspondence of the product to its publicised specifications.

If the product is used in a way which is not described in this manual, the product's
protection is compromised and the warranty becomes void.

«
...
8
9
10
11
12
...
»

Содержание LB 8300



























































Отзывы:

Нет отзывов

Похожие инструкции для LB 8300

Бренд: Taylor Made Страницы: 2

Бренд: York Fitness Страницы: 18

Бренд: Safco Страницы: 2

Бренд: Omni Страницы: 193

ImageQuant LAS 4000

Бренд: GE Страницы: 86

Бренд: GE Страницы: 160

Бренд: GE Страницы: 134

Бренд: Raymarine Страницы: 90

Бренд: B. Braun Страницы: 2

Aesculap Neurosurgery

Бренд: B. Braun Страницы: 13

Aesculap AdTec mini

Бренд: B. Braun Страницы: 2

Бренд: B.Well Страницы: 2

Бренд: B. Braun Страницы: 55

BA Ultimate LED

Бренд: B.A. International Страницы: 234

Бренд: Rain-Flo Irrigation Страницы: 16

Sportsound SSR-200

Бренд: Daktronics Страницы: 5

ECL Comfort 210

Бренд: Danfoss Страницы: 28

Бренд: Patlite Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды