BERTHOLD TECHNOLOGIES LB 8300 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 58

background image

2 Safety manual

Rod source shields LB 8300

12

64217BA2 Rev. 00, 10/2017

Employees with general knowledge

NOTICE

Employees with general knowledge must always be guided by one expert at

the very least. When dealing with radioactive substances, a radiation safety
officer must also be consulted.

Employees with general knowledge are e.g. technicians or welders who can
undertake different tasks during the transportation, assembly and installation of
the product under the guidance of an authorised person. This may also refer to
construction site personnel. The persons in question must have experience in

handling the product.

Experts

Experts are persons who have sufficient knowledge in the required area due to

their specialist training and who are familiar with the relevant national health
and safety regulations, accident prevention regulations, guidelines and
recognised technical rules.

Expert personnel must be capable of safely assessing the results of their work and

they must be familiar with the content of this manual.

Authorised Persons

Authorised persons are those who are either designated for the corresponding

task due to legal regulations or those who have been authorised by
BERTHOLD TECHNOLOGIES for particular tasks. When dealing with radioactive
materials, a radiation safety officer must also be consulted.

Radiation Safety Officer

In order to ensure proper handling and compliance with the statutory
requirements, the company has to appoint a radiation safety officer in
accordance with the applicable national law (in Germany:

Strahlenschutzverordnung [German radiation protection regulation]). The
radiation safety officer must implement the statutory radiation protection
requirements in order to protect employees against damage to their health
caused by handling radioactive materials.

NOTICE

Dangerous goods officers must not perform any activities as radiation

protection officers!
Radiation protection officers must have a special training with attendance of
an officially recognized course and appropriate professional experience.

«
...
10
11
12
13
14
...
»

Содержание LB 8300



























































Отзывы:

Нет отзывов

Похожие инструкции для LB 8300

Бренд: XAG Страницы: 24

Бренд: Zenbooth Страницы: 60

Бренд: Gaspardo Страницы: 16

Бренд: Gastrodomus Страницы: 4

Бренд: HANYOUNG NUX Страницы: 2

Бренд: Gastrodomus Страницы: 39

Бренд: Landi Renzo Страницы: 16

Бренд: IBM Страницы: 163

Бренд: NARGESA Страницы: 37

Бренд: NARGESA Страницы: 6

Бренд: OHAUS Страницы: 84

Бренд: Taylor Страницы: 41

Бренд: Rainin Instrument Страницы: 16

Бренд: Qiagen Страницы: 48

Бренд: Qiagen Страницы: 162

Бренд: Qazqa Страницы: 4

Бренд: Qlightec Страницы: 12

Бренд: TC Electronic Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды