BERTHOLD TECHNOLOGIES LB 8300 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 58

BERTHOLD TECHNOLOGIES LB 8300 Скачать руководство пользователя страница 44

7 Decommissioning

Rod source shields LB 8300

44

64217BA2 Rev. 00, 10/2017

Preconditions for returning shields to BERTHOLD

TECHNOLOGIES GmbH & Co. KG

•

Radioactive substances and their shields must not be damaged in any way and
a respective, valid seal test certificate must be provided. The seal test
certificate issued before the arrival of the radioactive substances in Germany
may not be older than 6 months.

•

If radioactive sources with isotope Am-241 or Cm-244 are returned, the special
form certificate must be attached.

•

At all times, any radioactive material sent to us must be sufficiently labelled

with your name and address. If we have sent you a quotation in advance, our
quotation number must be indicated, as well.

•

Radioactive substances may only be returned after the respective approval by

BERTHOLD TECHNOLOGIES GmbH & Co. KG. We are pleased to send you a
quotation regarding the costs.

•

Radioactive substances must be sent to Bad Wildbad, Germany, carriage paid.

BERTHOLD TECHNOLOGIES GmbH & Co. KG will not assume any costs for
customs clearance or transportation.

•

BERTHOLD TECHNOLOGIES GmbH & Co. KG is to be informed about any return
transport in advance. BERTHOLD TECHNOLOGIES GmbH & Co. KG will reject

any radioactive substances sent to Berthold without prior notice. Any storage
costs accrued in such case shall be borne by the sender.

•

A notification of the radioactive sources you wish to send to BERTHOLD

TECHNOLOGIES GmbH & Co. KG. We will be pleased to send you the current
version of the message form.

•

BERTHOLD TECHNOLOGIES GmbH & Co. KG is to be informed about any return
transport in advance. BERTHOLD TECHNOLOGIES GmbH & Co. KG will reject

any radioactive substances sent to Berthold without prior notice. Any storage
costs accrued in such case shall be borne by the sender.

NOTICE

Observe the observance of the current regulations when taking them out of
operation and disposal.

«
...
42
43
44
45
46
...
»

Содержание LB 8300



























































Отзывы:

Нет отзывов