BenQ DE350, Руководство пользователя

Страница: 34 / 120

28 Initializing the DVD Recorder
En
gli
sh
Remote control setup
How to install the batteries in the remote control
1 Locate the two AA (UM3) batteries and the remote control unit.
2 Unpack the remote control and turn it over to expose its back side. Open the battery
compartment cover by sliding it as indicated in the following picture:
3 Unpack and install the batteries into the battery compartment, paying attention to the correct
alignment of polarities (+/-) as indicated in the battery compartment:
4 Refit the cover of the battery compartment by aligning the lugs and sliding it into position:
Tips for using the remote control
• Point the front end of the remote control directly towards the front panel of the DVD
Recorder, not the TV screen. If you can't see the front panel of the DVD Recorder, the remote
control will likely not work properly with it.
• Do not use the remote control when something (people, furniture, etc.) is blocking the direct
line-of-sight between the remote control and the front panel of the DVD Recorder. In cases like
this, either remove the obstruction or move the remote control to a clear line-of-sight position.