BenQ DE350, Руководство пользователя

Страница: 73 / 120

67 Recording
Eng
lish
Manual recording
Tips
Should you have multiple input devices connected using separate video inputs (Composite Video or S-
Video) you should switch on and use only the video input source device you wish to have the DVD
Recorder record onto DVD, and turn off all other video input source devices not in use.
When both S-Video and Composite Video inputs are present, the DVD Recorder will automatically
select the S-Video input.
CAM1:
Selects the signal source from the device connected to the Composite Video input terminals on the front
panel.
DV (CAM2):
Selects the signal source from the device connected to the DV input port on the front panel.
4. When you're ready to start recording, press either:
- the
Record
button on the remote control; or
- the button on the DVD Recorder.
The
’Record
’ icon will display on-screen.
1. Press the
DVD/HDD
button on the remote control to
select the medium for recording.
2. If DVD+RW or DVD+R is selected for recording,
place an unfinalized suitable DVD in the disc tray.
If a video source was being displayed, it will stop
being displayed while the DVD Recorder checks the
newly inserted disc. The message ’READING’ will
show on the front display panel. When read, the
OSD (on screen display) will display, listing any
previous recordings on the disc.
Should any other messages display on-screen, the
disc is unreadable, unrecognized, unwritable, or is
full. Refer to "Troubleshooting" on page 109 for a
possible solution.
3. Press the
Input
button several times to select
the video input source you wish to record.
TUNER:
Selects the TV/CATV signal source connected to
ANTENNA terminal on the rear panel.
If ’
TUNER ’ is selected as the input source, you can press
the
Channel
button to select the channel you
wish to record. You can also select a channel directly by
using the numeric keys (two digits: 01–99) on the remote
control.
EXT1:
Selects the signal source from the device connected to
the Composite input terminals on the rear panel.
EXT2:
Selects the signal source from the device connected to
the S-Video input terminal on the rear panel.