BenQ DE350, Руководство пользователя

Страница: 36 / 120

30 Initializing the DVD Recorder
En
gli
sh
Initial startup (virgin mode)
This procedure is only required when the DVD Recorder is plugged in and powered up for the
first time ever. Before you proceed, you must have already connected the DVD Recorder to a
display device and turned that device on so that you can see the OSD ’Setup’ menu of the DVD
Recorder. You must also have connected the DVD Recorder to the TV antenna (if required),
and have assembled the remote control (i.e. fitted the batteries correctly). For details, see
"Initializing the DVD Recorder" on page 27, and "Remote control setup" on page 28.
1. The initial setup menu will display on-screen
starting with language setup. This is the language
which will be displayed on screen in the ’Setup’
menu by the DVD Recorder. The default is
’
English
’.
If you wish to retain ’
English
’ as the OSD language,
press the
OK
button on the remote control.
Should you wish to change to another language,
press the
Down
or
Up
button on the
remote control to select your desired language, then
press the
OK
button to make the selection.
2. You will then be asked to select a TV input source.
This step allows you to select the correct type of TV
antenna cable you have connected to the DVD
Recorder.
If TV signal is connected to the DVD Recorder,
press the
OK
button on the remote control. If
CATV cable is connected to the DVD Recorder,
press the
Up
or
Down
button on the
remote control to move the highlight bar to ’
CATV
’
and then press the
OK
button to make the
selection.
The DVD Recorder will automatically search for
and store TV or CATV Channel frequencies that it
finds on the ’ANTENNA’ cable connection. Even if
no antenna cable is connected, you must proceed
with this step so that the DVD Recorder can
complete initialization. You can always use the
’Setup’ menu to search for TV channels at a later
time.
If you wish to record TV programs onto DVDs
using the DVD Recorder, you should connect the
antenna cable to the DVD Recorder before
continuing with the initialization process. See
"Connecting the DVD Recorder to the TV antenna
cable" on page 18 for details.
3. This may take several minutes because the DVD
Recorder searches all TV frequencies and tests for a
station signal. The progress is displayed on screen.
4. After the channels are scanned and stored, you will
be asked to perform time setup.