BenQ DE350, Руководство пользователя

Страница: 2 / 120

En
gli
sh
Copyright
Copyright 2005 BenQ Corporation. All rights reserved. www.BenQ.com
No part of this publication may be copied, recorded, reproduced, transmitted, transcribed,
stored in a retrieval system, translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Furthermore, BenQ Corporation reserves the right to revise
this publication from time to time and to make changes in the contents hereof without
obligation to notify any person of such revision or changes.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
All trademarks or product names used in this document are the registered property of their
respective owners.
Precautions
Please read these precautions carefully before use. Keep this document for future reference.
- Only ever place the device on a stable, level and flat surface.
- Do not expose the device to extreme temperatures, humidity, dust, direct sunlight, rain, or
spray.
- Do not move or drop the device while the hard disk drive is being operated. Such
circumstance might cause damage to the hard disk drive.
- Do not block the vents on the rear panel of the device, as poor ventilation over a long
period may result in damage to internal components and device failure.
- Do not change the mains plug to a different type or allow the power cable to be damaged.
- The mains plug on the power cable can used as a power disconnection device, and must
remain readily accessible at all times. Disconnect and isolate the device from the power
supply when it isn’t going to be used for an extended period of time (e.g. holidays away).
- Follow the battery instructions for the remote. Make sure the batteries are correctly and
properly installed. Do not use batteries of different types or different brands at the same
time. Remove batteries when it isn’t going to be used for an extended time (e.g. holidays
away).
- Use only BenQ approved accessories and recording media. Incorrect media types may not
work as expected, and could cause damage to the device.
- Do not attempt to repair the device under any circumstances. There are no user-servicable
parts in this device. Refer all servicing only to suitably qualified and experienced personnel.
Safety Information
Laser warning
The laser component in this device is rated Class 1 – capable of emitting invisible laser
radiation which can cause eye damage. To avoid exposure to the laser beam, do not remove any
covers and look into the device whilst it is turned on.
High Voltage warning
This device uses high voltage capable of causing burns and possible death should you come
into contact with live parts. To avoid exposure to high voltage, do not remove any covers and
reach into the device whilst it is turned on.
Refer all servicing only to suitably qualified and experienced personnel.