DDT-320-000 Rev G Belmont Medical Technologies
Page
72
of
114
While the message “Core Readout Too Low” appears, the
machine is not regulating the patient's temperature and no water
is flowing to the wrap.
Check that the core temperature probe is in place and the low temperature
represents the true patient status, then touch
OK
to re-activate
temperature control.
NOTE:
If the user disregards the message and does not touch
OK
for
over 30 minutes,
the alarm cannot be silenced.
When
OK
is touched, the screen returns to the Main Screen and the
following message appears for 5 seconds.
Figure 36: Thermoregulation is Continuing Message
