14
Release Notes
Known Issues and Limitations
[Ref. #KX-6311]
decoding of a signal’s aspect ratio from AFD or WSS metadata
• Detection of video freeze, black, luma too high conditions
• Detection or extraction of closed captions, teletext or subtitles
• Extraction of Dolby E metadata
• Loudness measurement
• Extraction of XDS metadata
• Layout and video display:
• More than eight video windows over two displays; duplicating video more than
eight times
• Overlapping video windows
• Video signal repeated in more than 2 windows
• Display rotation
• HD-SDI monitoring output
• Brightness/contrast/color saturation calibrations
• Detail enhancer calibration
• Other input/output signals:
• Discrete audio inputs (only embedded audio inputs are supported)
• Router outputs
• DVI background inputs
• Composite inputs
• Graphical display elements:
• Analog clocks (only digital clocks are supported)
Kaleido-X16
•
[Ref. #33131]
EdgeVision compatibility:
A Kaleido-X16 multi-viewer configured to feed
its HDMI output to an EdgeVision device must have version 5.30 (or later) of the
Kaleido-X software.
•
[Ref. #28752]
Audio monitoring:
When monitoring a discrete analog or AES audio source
from an ABT through one of the multi-viewer’s HDMI outputs, it may happen that the
audio is lost for a second or two, intermittently.
•
[Ref. #26636]
Kaleido-X16 with two serial devices:
If there are two serial devices
connected to a Kaleido-X16 multi-viewer and configured in XEdit, then swapping their
port assignments may result in a nonfunctional system.
Workaround:
If you need to reconfigure the serial port assignments for two devices in
XEdit, first disconnect both devices from the multi-viewer as follows:
1 In the
Interconnects
tab, click the link between the device and the multi-viewer,
and then, in the
Properties
pane, set the
RS-422 communication port
attribute to
“Disconnected”.
2 Save the system.
If you are using XEdit in offline mode, then export the database to the multi-viewer.
3 Set the new port assignment for each device, and then save the system again.
If you are using XEdit in offline mode, then export the database to the multi-viewer
once more.
