manualshive.com logo in svg

Belden Miranda Kaleido-X16, Руководство пользователя, Страница: 55 / 61

Поделиться
Скачать
Belden Miranda Kaleido-X16 Скачать руководство пользователя страница 55

51

Kaleido-X

Release Notes

Clusters

Kaleido-X Output/Expansion Cards

•

Kaleido-X (7RU) and Kaleido-X (14RU):

 One card must always be present in either 

OUTPUT slot C (KXO-Dual or KXO-Dual3) or OUTPUT slot D (KXO-Dual, KXO-Dual3 or 
KXO-EXP) to ensure proper operation of the multi-viewer system.

•

Kaleido-X (4RU):

 One KXO-Dual or KXO-Dual3 card must always be present in either 

OUTPUT slot A or OUTPUT slot B to ensure proper operation of the multi-viewer system.

KMV-3901/3911 Time Reference

•

Densité CPU-ETH2 Enhanced Ethernet Controller Card:

 The Densité frame housing a 

KMV-3901 or KMV-3911 multi-viewer card must have a controller card with firmware 
version 2.0.4 or later. A controller with an earlier version of the firmware cannot provide 
a time reference to the multi-viewer card.

•

Date/time configuration:

 The KMV-3901/3911 multi-viewer receives date and time 

information from the Densité CPU-ETH2 controller upon startup. Unlike other multi-
viewer models, date/time and NTP settings for the KMV-3901/3911 cannot be 
configured in XAdmin. However, the Densité CPU-ETH2 controller itself can be 
configured to provide date and time information from an NTP server.

•

Time Code Reference from REF-1801:

 If the time reference signal is provided by a 

Densité REF-1801 HD/SD Frame Reference Module, this module must be configured as 
follows:

• An input reference signal must be connected to the BNC marked REF on the REF-

1801’s rear panel.

IMPORTANT

Before changing the system name or IP address of a multi-viewer 
associated with a cluster, review the following.

If you change the system name or IP address of a cluster member while 
another cluster member is offline or otherwise unavailable, the cluster’s 
integrity will be broken. If you attempt to make such a change, XEdit will alert 
you of the situation, prompting you to cancel the operation and try again 
later, when all cluster members are available. However, in the advent that 
such a change was made by mistake, or that is had to be forced for some 
reason, you will have to repair the broken cluster (see “Repairing a Cluster 
System” in the Kaleido-X User’s Manual).

Changing the system name or IP address of a KMV-3901/3911 multi-viewer 
associated with a cluster, by using the card’s control panel on the Densité 
housing frame, or by using the KMV-3901/3911 control panel in iControl, is 
not supported.

To maintain the integrity of a cluster configuration, such changes must be 
made by using the system configuration features available in XAdmin, or 
from the monitor wall menu (which, in the case of a 

cascade

 system, is 

currently not supported).

Содержание Miranda Kaleido-X16






























































Отзывы:

Нет отзывов