17
Kaleido-X
Release Notes
•
RCP operation:
In the case of a cascade system, monitor wall functions performed via
the associated buttons on a Kaleido-RCP2 or RCP-200 (ASPECT RATIO, UNDERSCAN,
FULL SCREEN, etc.) only work in parts of the layout associated with the multi-viewer
that is directly connected to the displays.
Workaround:
Use the monitor wall menu.
•
Kaleido-X16 cascade, Kaleido-IP hybrid cascade:
In the case of a Kaleido-X16 cascade,
Kaleido-IP/Kaleido-X16 cascade or Kaleido-IP/Kaleido-X cascade, the following
limitations apply:
• Audio monitoring is not supported.
• Router outputs are not cascaded.
• In the case of a
KMV-3901/3911
cascade, XAdmin may fail to report the system’s
genlock source, reference format, and related statuses for the second- and third-layer
cards (i.e., the ones that are not directly connected to a monitor wall display). iControl
alarm browsers, and filtered system lists that display alarms in XEdit may also
incorrectly report a reference input loss for these cards.
•
KMV-3901/3911 cascade:
Restarting one of the cards may result in a blank monitor
wall display.
Workaround:
If you restart the card associated with the third layer of a cascade, then
restart the card associated with the second layer. Once the card associated with the
second layer has restarted, then restart the card associated with the first layer as well.
• In the case of a
KMV-3901/3911
cascade, an output resolution of 1600 × 1200 is not
supported.
• Full screen layouts are not supported.
• Changing a display resolution from the monitor wall menu is not supported. See
Ref. #27193 on
for more information.
• Changing the system name or IP address of a
KMV-3901/3911
multi-viewer associated
with a cascade, by using the card’s control panel on the Densité housing frame, or by
using the KMV-3901/3911 control panel in iControl, is not supported. To maintain the
integrity of the underlying cluster configuration, you must use XAdmin, or the monitor
wall menu, to make any such changes. In the advent that such a change was made by
mistake, or that is had to be forced for some reason, you will have to repair the broken
cascade (see “Repairing a Cascade Configuration”, in the KMV-3901/3911 Cascade Step-
by-Step Configuration guide).
•
Some changes are not automatically propagated to all members of a cascade.
If you
wish to have the same configuration for every multi-viewer in a cascade, then the
following elements must be manually replicated:
• system calibrations
• sources/channels and router configuration
• pointer size configuration (after changing the pointer size for a room, on all multi-
viewers in a cascade, you must restart every multi-viewer, for the change to
become effective across the cascade system)
• audio monitoring output assignment (the audio monitoring output assignment
configured for each RCP user must be replicated manually to every member of the
cascade system)
