28
Release Notes
Known Issues and Limitations
•
[Ref. #27403]
Kaleido-IP:
The current version of the Kaleido-X software for the Kaleido-IP
does not support detection or extraction of closed captions, teletext or subtitles.
•
[Ref. #27759]
KMV-3901/3911 and Kaleido-X16 support for audio monitoring over
HDMI:
If AC-3 audio from an SDI source is routed for monitoring, to a monitor wall
display that does not support this format, the display’s loudspeakers may emit a
constant frying noise or become silent.
Workaround:
To troubleshoot or confirm the situation, you may want to configure UMDs
in your layout to display the audio format associated with the current source, for each
video window on the monitor wall.
•
[Ref. #26964]
KXO-24Router cards do not support 3Gbps signals:
In the case of a
Kaleido-X (7RU) with the 3G input option enabled, if you try routing a 3 Gbps source to
a KXO-24Router destination, the internal router will not let the video signal through,
resulting in a black output.
•
[Ref. #22950]
SD video in SDTI input:
If you were to feed a multi-viewer's SDTI input port
with SD video signals (instead of audio signals from an Audio Bridge Terminal), then no
status or alarm indicator in XAdmin will report any problem with the signal format. In
addition, the IP address of the last ABT that was connected to this port will be shown.
Workaround:
Do not feed the SDTI input port with a video signal.
•
KXI-DVI-Bridge:
The KXI-DVI-Bridge does not support dual-link DVI.
•
KXI-DVI-Bridge:
A KXI-DVI-Bridge used
without dongle
skips every second input frame
when converting a DVI signal (60 fps) to HD-SDI (30 fps).
•
[Ref. #15487/12376]
NTSC-J:
Video alarm levels set in XEdit do not work with NTSC-J.
When NTSC is decoded, the 7.5 to 100IRE range is mapped from 40h to 3ACh in the
digital realm. When NTSC-J is decoded, the 0 to 100IRE range is mapped from 40h to
3ACh in the digital realm. This difference in mapping causes the same incoming analog
level to be mapped to a different digital level based on the standard used. This results
in alarms being incorrectly reported for
Luma too high
and
Black
.
Alarm Management and Actions
[Ref. #KX-6248]
Global alarm metadata:
Editing of global alarm metadata from a
multiviewer’s GSM, in iControl, is not yet supported.
•
[Ref. #33057]
Virtual alarms:
When building a virtual alarm based on the current multi-
viewer, clicking
Use selected folder as path
in the
Build Virtual Alarm
window may
have no effect.
Workaround:
Manually enter the desired path in the
Path
box.
•
[Ref. #25730]
Virtual alarms:
When a virtual alarm associated with a router source
becomes pending (for example after the router source was disconnected), then
background action items based on this alarm’s status may not be executed.
Note:
Miranda’s current implementation of the HDMI standard does not
include detection of the audio formats supported by a specific display. Most
display models support compressed audio.
