26
Multiviewer Cabling
Changing the Output Resolution
5 Connect the power cords, and then turn the power on. The power switch is located on
the front panel.
1
6 If you want to use a different display resolution, see
Changing the Output Resolution
on page 26, for detailed instructions.
Changing the Output Resolution
The multiviewer’s output resolution can also be set in XEdit in the Rooms tab. To set the
multiviewer’s streaming output resolution, see
To change a display’s resolution from the monitor wall
1 Connect a mouse to one of the Kaleido
-
IP
, on page 114 for more information about this.
2 Right-click anywhere on the monitor wall, point to
Monitor Wall
(if you clicked a
monitor), and then click
Display resolution
.
• If your displays are not collocated with your Kaleido
-
IP unit, use long-range
active cables when more than a short cable length is required. Contact
Technical Support to purchase long-range active cables that have been
tested to work with this multiviewer. See
Grass Valley Technical Support
on page 128.
In this case, use the provided active DisplayPort-to-HDMI cable between
the Kaleido
-
IP and the active cable.
1.The Kaleido Software does not support activating a soft shutdown from the Kaleido
-
IP frame’s power
button.
IMPORTANT
Should you want to add or replace a display or AV receiver at a later time,
make sure the multiviewer is powered off, before making these changes. In
the event that you have connected such a device while the multiviewer was
running, you must restart the multiviewer for audio monitoring to be
restored. Refer to
Restarting and Shutting Down a Kaleido
-
IP Multiviewer
, in
the Kaleido Software User’s Manual. See
Note:
To connect the multiviewer for SMPTE ST 2022-7 hitless redundancy,
see
Cabling and Configuring the Head Streaming to support
Notes
(continued)
Содержание GRASS VALLEY KALEIDO Series
