Belden GRASS VALLEY KALEIDO Series, Инструкция по установке и обслуживанию

Страница: 45 / 128

45
5
System Configuration
Introduction
This chapter shows how to configure the multiviewer.
System Requirements for a Client PC
A client PC or laptop meeting the following requirements is required to access the XAdmin
Web client, and the other Kaleido Software client applications.
Multiviewer Model Representation in XEdit and XAdmin
The name used to represent a multiviewer model is shown in the table below.
Installing Kaleido Software Client Applications
In addition to the XAdmin Web client, which does not require installation, the Kaleido
Software includes the following client applications:
• XEdit is a client application used to create layouts for the monitor wall, and to configure
your multiviewer system, from your PC. When this PC has network connectivity to the
multiviewer, you can use XEdit to modify layouts and settings directly on the
multiviewer, or you can work locally on the computer and then export your changes to
the multiviewer.
• If you have only one multiviewer (or if you have more than one but you intend to
always have the same version of the Kaleido Software on all of them), download the
XEdit installer file from the multiviewer’s home page. Whenever you install a new
version of the Kaleido Software on the multiviewer, the next time you open XEdit, your
copy of the application will be automatically updated from the multiviewer. See
Installing XEdit from your Multiviewer’s Home Page on page 46.
Operating system Microsoft Windows 10, Windows 8.1, Windows 8, or Windows 7.
Processor
The minimum required by the operating system or better.
Memory The minimum required by the operating system plus 2 GB or more.
Disk space The minimum required by the operating system plus 2 GB or more.
Multiviewer model Represents
Kaleido - IP-4 A Kaleido - IP X120 or X320, frame with four network adapters
Kaleido - IP-6 A Kaleido - IP X320 frame with six network adapters