Belden GRASS VALLEY KALEIDO Series, Инструкция по установке и обслуживанию

Страница: 84 / 128

84
System Configuration
Configuring Head Streaming
Configuring Head Streaming
When the multiviewer has been configured to use NMOS,
an NMOS controller is able to
remotely control the SMPTE ST 2110-20 head output streaming through IS-05. To enable NMOS,
see
Configuring the Kaleido - IP to use SMPTE ST 2022-6 / 2110 Inputs and ST 2110 Outputs
with NMOS , on page 92.
PREREQUISITES:
• Head streaming is a licensed feature. See Available Hardware and Software Options , on
page 75. Obtain the head streaming (
KIP-OPT-STREAMING-OUT
) license keys from
Grass Valley. See Grass Valley Technical Support , on page 128.
• The connected network must have a PTP grandmaster server clock on its domain.
• The Kaleido
- IP’s date and time setting must be set to use
PTP
. See Configuring a
Multiviewer’s IP, Date, and Time Settings with XAdmin , on page 33.
• To support SMPTE ST 2110-20 head streaming:
• SMPTE ST 2110-20 head streaming is a licensed feature. See Available Hardware
and Software Options , on page 75. Obtain the head streaming (
KIP - OPT - UCIP - OUT
and Rivermax license ) license keys from Grass Valley. See Grass Valley Technical
Support , on page 128.
• Multiviewer network ports LAN5 and LAN6 are only available on certain
multiviewer models. See Kaleido - IP Multiviewer Ethernet Port Usage , on page 23.
The Kaleido - IP must have one of the following network interface cards installed:
KIP - OPT - ETH - 2S, KIP - OPT - ETH - 2Q, KIP - OPT - ETH - 2C. See Kaleido - IP X320/X120 PCI
network interface add-on card options (choose one) , on page 77 for more
information.
• Media ports LAN5 and LAN6 must be configured. See Configuring a Multiviewer’s
IP, Date, and Time Settings with XAdmin , on page 33. Uncompressed streams must
use LAN5 and LAN6 .
To configure head streaming
1 Open XAdmin. See Opening XAdmin , on page 55.
2 Install the head streaming license key (
KIP-OPT-STREAMING-OUT
) from Grass Valley.
See Enabling Options , on page 80.
Notes
• Even when the multiviewer’s display output is set to 4K output resolution,
the maximum streaming output resolution is HD (1920 × 1080p).
• For a multiviewer that has streaming for two heads, both heads must be
configured with the same resolution.