Belden GRASS VALLEY KALEIDO Series, Инструкция по установке и обслуживанию

Страница: 31 / 128

31
Kaleido - IP X320/X120
Installation & Service Manual
Unicast and Multicast Sources and Destinations
Video sources and the multiviewer’s streamed mosaic outputs support both unicast and
multicast operation. The IP address used determines the operating mode (unicast /
multicast).
Changing the Management Network IP Address from the Monitor Wall
The Management Network IP address, system name, and other parameters can be set via a
control panel on the monitor wall, however this will also change the current IP address of
the Media Network interfaces.
To change the Management Network IP address of the Kaleido - IP from the monitor wall
1 Connect a mouse to one of the USB connectors of the Kaleido - IP. See Troubleshooting
with the Kaleido - IP frame’s USB ports , on page 114 for more information about this.
2 Connect a keyboard to one of the USB connectors of the Kaleido - IP.
3 Right-click anywhere on the monitor wall, point to
Monitor Wall
(if you clicked a
monitor), and then click System configuration .
The System Configuration window appears.
4 Click the
Ethernet
tab.
5 If your network has a DHCP server, set DHCP to automatically obtain an IP address from
the network. Otherwise, set a fixed IP address manually: type the required Frame IP
address (for the Management Network ), Network mask , and Gateway address in the
appropriate boxes.
IP Packet
Transmission Method Description IP Address Range
Unicast One source sends a stream to a specific destination
(point-to-point)
0.0.0.0 and
223.255.255.255
Multicast One source streams to one or more destinations at
the same time on the same subnet
224.0.0.0 and
239.255.255.255