Belden GRASS VALLEY KALEIDO Series, Инструкция по установке и обслуживанию

Страница: 98 / 128

98
System Configuration
Adding Fonts to a Kaleido - IP
3 Click Configure , under Font configuration .
The “Font configuration” page appears.
4 Click Choose a font to upload .
A file chooser window appears.
5 Navigate to the font file you want to upload, select it, and then click
Open
.
A progress indicator appears momentarily, followed by a confirmation message.
6 Click Restart unit .
The system prompts you to confirm.
7 Click Yes to proceed.
Your multiviewer will shut down, and then start again. This may take a while.
Once the multiviewer has restarted, the system notifies you.
8 Click OK .
The XAdmin Status and Options page appears.
9 Make sure the same font is available on the client PC where you use XEdit. (To install a
font on Windows 7 or later, right-click the TTF file, and then click
Install
.)
10 Close XEdit and then open it again.
The new fonts are now available, if you:
• Connect XEdit to the multiviewer.
• Download the database from the multiviewer to your local workspace
(see Importing a Database on page 100).
Note:
The Kaleido Software supports true type fonts (TTF) only.