94
System Configuration
Configuring the Kaleido
-
IP to use SMPTE ST 2022-6 / 2110 Inputs and ST 2110 Outputs with NMOS
The new settings are saved locally.
5 Click
OK
.
6 Once a setting change has been saved, the
Apply settings
button becomes available.
7 Click
Apply settings
.
The multiviewer must be restarted for changes to the network configuration to take
effect. A message appears prompting you to reboot the system immediately.
8 Click
OK
.
Your Kaleido
-
IP restarts.
9 Receivers must be created by creating
Virtual Inputs
in XEdit. Refer to
Virtual Inputs
in
the Kaleido Software User’s Manual. See
10 For head streaming, senders are created when a head’s mosaic output is configured to
stream according to the SMPTE ST 2110-20 standard; see
on page 84 for more information.
Содержание GRASS VALLEY KALEIDO Series
