Belarus 3522.5 Скачать руководство пользователя страница 80

Страница: 80 / 340

3522.5-0000010

РЭ

To close the hatch 1 pull the board 2 down until the hatch is fixed in a closed posi-

tion.

1 – hatch; 2 – board; 3 – detent.

Figure 2.20.4 – Opening of hatch with detent

To open the hatch with the handle move the handle 2 (figure 2.20.5) down and push

it up. Then fix the hatch 1 in an opened position, pressing the handle 2 to the right along
tractor movement.

To close the hatch turn the handle 2 to the position “not fixed”, pressing it to the left

along tractor movement. Pull the handle 2 down, and then turn it to the right along tractor
movement until the hatch is fixed in a closed position.

) hatch closed b) hatch opened

1 – hatch; 2 – handle.

Figure 2.20.5 – Opening of hatch with handle

https://tractormanualz.com/

Содержание 3522.5





















































































































































































































































































































































Результаты поиска

Содержание 3522.5

Отзывы:

Бренды по названию

Популярные бренды

Belarus 3522.5, Руководство оператора

Результаты поиска

Содержание 3522.5

Отзывы:

Бренды по названию

Популярные бренды