manualshive.com logo in svg

Belarus 3522.5, Руководство оператора

Оператор состав мануал для Belarus 3522.5 доступен для скачивания совершенно бесплатно на manualshive.com. Этот руководство содержит важную информацию о производственном оборудовании, которая поможет вам эффективно использовать ваш трактор. Скачайте ваш экземпляр сейчас, чтобы быть в курсе всех функций и возможностей Belarus 3522.5.

Поделиться
Скачать
background image

3522.5-0000010 OM

230

To carry out operations in wheel twinning do the following:
1. Place the tractor on a horizontal surface so that it has a free access from all sides

and is in a stable position.

2. Dismount the front wheel fenders in accordance with subsection 3.26 “Front

wheel fenders”.

3. Prepare mechanisms for wheel twinning, set a dimension L1, screwing the hook

bar in or out (figure 4.2.10).

4. Locate tires of tractor main wheels, staying under the action of vertical load, at

equal height with tires for special wheels, for this reason it is required to move the tractor
wheel onto boards with a total thickness of 80 mm.

4. Before installing the ring spacer of the special wheel into the main wheel rim it is nec-

essary to fix lug-nuts of mechanisms for twinning by means of special bolts (figure 4.2.10), un-
der the heads of which spring washers shall be mounted. The special bolts shall be tightened
with a torque of 570 to 630 N·m. The holes of lug-nuts, where the bars are hooked, shall be
positioned at a tangent to a diameter of their location.

5. Move the special wheel towards the main wheel of the tractor and put its ring

spacer into the main wheel rim (figure 4.2.9). If this assembly is carried out for the first
time, then it is required to lubricate the ring spacer edges at a length L2 (figure 4.2.9) with
a grease Litol-24 GOST21150-87.

When moving the special wheel be cautious to avoid injury in case it falls down. It is

desirable that the operation in wheel displacing is carried out by two people. Hereby before
the operator mounts the first mechanism for twinning his assistant shall stand by the spe-
cial wheel to prevent it from falling out of the main wheel rim.

6. Put the hook of the twinning mechanism into the lug-nut from the wheel center

side. Link the bearing part of the twinning mechanism to the thrust ring of the special
wheel rim, then latch it by means of the tube wrench. The mechanisms shall be tightened
with a torque of 300 to 500 N·m.

To avoid detachment of the special wheel during tractor operation due to unlatching

of mechanisms, put the securing pins in after their tightening.

7. After all twinning mechanisms have been mounted, put the tube wrench into the

set of spare parts, tools and accessories. Check air pressure in all wheel tires and if nec-
essary adjust it.

The pressure for each tire must be fixed according to the section of tractor manual,

describing tractor operation with twinned wheels.

ATTENTION: PRESSURE IN OUTER (SPECIAL) WHEELS SHALL BE LESS

THAN PRESSURE IN MAIN WHEELS OF THE TRACTOR!

The twinned wheels of the tractor shall be disassembled in a sequence, which is re-

verse to their assembly, herewith:

a) to detach the special wheels it is necessary to move the main wheels of the trac-

tor one by one onto the boards with the total thickness of approximately 80 mm and re-
move the mechanisms. Make sure that it is possible to lay the wheel after the mechanisms
have been removed. Use orifices “A” on the ring spacer (figure 4.2.9) to detach the special
wheel from the rim;

b) in case it is not possible to dismount the special wheel, drive the tractor at first

gear (with the speed not higher than 5 km/h) to move the special wheel onto the above
mentioned boards and detach the wheels;

c) prevent the special wheels from falling and running away.
d) mount the front wheel fenders back in accordance with subsection 3.26 “Front

wheel fenders”.

ATTENTION: OPERATING THE TRACTOR WITH THE FRONT WHEELS

TWINNED STRICTRLY OBSERVE REQUIREMENTS OF THE SECTION 5 “COUPLING
OF IMPLEMENTS”. FAILURE TO COMPLY WITH RULES ON TRACTOR OPERATION
WITH TWINNED WHEELS MAY RESULT IN FDA BREAKDOWN AND PREMATURE
WEAR OF TIRES!

https://tractormanualz.com/

Содержание 3522.5





















































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3522.5

Valtra HiTech T Series Operator'S Manual preview
HiTech T Series
Бренд: Valtra Страницы: 31
Kioti DK35SE Manual preview
DK35SE
Бренд: Kioti Страницы: 32
New Holland TL 75 Service Manual preview
TL 75
Бренд: New Holland Страницы: 51
PEQUEA SuperSpread PTO 135 Operator'S Manual preview
SuperSpread PTO 135
Бренд: PEQUEA Страницы: 28
MAGNATRAC MH4800 Operator / Technical Manual preview
MH4800
Бренд: MAGNATRAC Страницы: 86
GE 165D4700P385 Owner'S Manual preview
165D4700P385
Бренд: GE Страницы: 24
AVANT A21048 Operator'S Manual For Attachment preview
A21048
Бренд: AVANT Страницы: 20
Verts Loisirs VLB12597 Instruction Manual preview
VLB12597
Бренд: Verts Loisirs Страницы: 72
Classic Accessories Zero Turn 73997 Instructions preview
Zero Turn 73997
Бренд: Classic Accessories Страницы: 3
ITL SOLIS 20 Service Manual preview
SOLIS 20
Бренд: ITL Страницы: 469
AVANT A440199 Operator'S Manual For Attachment preview
A440199
Бренд: AVANT Страницы: 34
Kubota M7-132 Operator'S Manual preview
M7-132
Бренд: Kubota Страницы: 332

Бренды по названию

Популярные бренды

Загрузить еще бренды