2022.3-0000010 OM
242
Table 6.2 finished
Periodicity, h
Opera-
tion No
Operation description
8-10 125 250 500 10002000
61
Change oil in transmission line
X
62
Check oil in the main gear housing and in
wheel-hub drives housings of FDA
X
63
2)
Change oil in FPTO reducing gear
X
64
Change hydraulic-brake fluid in clutch operating
control drive
X
65
Change hydraulic-brake fluid in brake control
drive
X
66
2)
Lubricate pivot axis bushings of FLL front links
X
67
Change lubricant in the steering hinge joints and
wash the parts of the steering hinge joints
X
68
Check/adjust pneumatic system pressure regu-
lator
X
69
Tighten cylinder heads tension bolts
X
70
Rinse coarse fuel filter
X
71
Check / retorque tractor external threaded joints
X
72
Change filter cartridges of ventilation system
and cab heating
X
73
Wash the engine cooling system and change
cooling liquid in the engine cooling system
X
74
Wash engine breather
X
75
Check / adjust the fuel pump on the stand
X
76
Check nozzles for pressure at the beginning of
injection and the quality of fuel spraying
X
77
Check / adjust fuel injection advance angle
X
78
Replace filter-drier of the air-conditioning system Every 800 hours of operation or
once in a year
79
Adjust valves of GB centrifuge
Every 800 hours of operation or
once in a year
80
Carry out maintenance of engine air cleaner
As it becomes dirty
__________________________________________________________________________________________
1)
The operation shall be carried out only on tractors «BELARUS-
1822 .3/2022 .3»
2)
The operation shall be carried out if FLL and FPTO are installed against order
3)
The operation shall be carried out once during the first maintenance on a shift
basis (in every 8-10 hours of operation), which is carried out by the customer and then
in every 125 hours of tractor operation
4)
Control and bringing to the internal pressure norm in the tractor tires is carried
out each time when one mode of the tractor operation is changed in another operation
mode, and when the implements and tools coupled with the tractor are replaced
5)
AB inspection and maintenance shall be carried out once per 3 months and not
less
6)
First and second change is carried out in 500 hours of tractor operation. Then
the change shall be carried out in every 1000 hours of operation simultaneously with oil
change
https://tractormanualz.com/
Содержание 1822.3
