Belarus 1822.3, Руководство оператора

Страница: 238 / 358

2022.3-0000010 OM
237
6.2 Providing access to the components for maintenance services
6.2.1 Providing access to the components for maintenance service of tractors
with facing consisting of the hood, mask and side pieces.
Before starting maintenance service operations, it is required to remove both side
pieces 10and 18 (figure 6.2.1), open and fix tractor hood 8.
To get an access to the units located under mask 1, it is required to open, then fix tractor
mask 1 with the hood being closed.
IT IS FORBIDDEN TO OPEN THE HOOD AND THE MASK AT THE SAME TIME!
To remove side pieces 10, 18, it is required to do the following:
- open four locks 2;
- release detents 12 from support 11;
- remove side pieces 10, 18.
To open hood 8, it is required to do the following:
- pulling cable control handle 9, release clinch 7 from linking with lock 8;
- open hood 6;
- fix it in the open position by setting link 4 in bracket 3;
- make sure hood 8 is securely fixed in the open position.
To open mask 1, it is required to do the following:
- pull mask 1 forward to release supports 15 from clinch 16;
- uplift mask 1;
- fix it in the open position by setting link 13 in plate 17;
- make sure mask 1 is securely fixed in the uplift position.
To close the hood, it is required to do the following:
- slightly open hood 6 to release link 4 from bracket 3;
- fix link 4 in clip 5;
- lower hood 6 in the extreme lower position until a specific click is heard (lock 2
comes into action).
To close mask 1, it is required to do the following:
- slightly uplift mask 1 to release link 13 from plate 17;
- fix link 13 in clip 14;
- lower mask 1 in the lower position until a specific click is heard (supports 15 are
fixed in clip 16).
To mount side pieces 10, 18, it is required to do the following:
- set detents 12 into supports 11;
- fix side pieces 10, 18 by means of locks 2.
https://tractormanualz.com/