Belarus 1822.3, Руководство оператора

Страница: 242 / 358

2022.3-0000010 OM
241
29 Lubricate pivot axis bearing of FDA X
30 Check/adjust air conditioner compressor drive
belt tension X
Table 6.2 continued
Periodicity, h Opera-
tion No
Operation description
8-10 125 250 500 10002000
31
5)
Carry out maintenance of AB X
32
2)
Check oil level in FPTO reducing gear
33 Lubricate HSC hydraulic cylinders hinged joints X
34 Rinse mesh filter of transmission hydraulic sys-
tem X
35 Check/adjust clearances in steering link joints X
36 Check and adjustment of wheels toe-in X
37 Lubricate clutch release yoke bearing X
38 Clean rotor wheel of centrifugal oil filter of GB X
39 Change engine oil filter X
40 Clean rotor wheel of centrifugal oil filter of the
engine X
41 Change oil in the engine crankcase X
42 Drain sediment from fine fuel filter X
43 Carry out maintenance of alternator and starter X
44 Clean filter cartridge of air pressure regulating
filter in the pneumatic system X
45 Adjust service brake control X
46 Adjust parking brake control X
47 Check pneumatic system main pipes for tight-
ness X
48 Check/adjust drives of pneumatic system brake
valves X
49 Check all joints of air cleaner and inlet pipe for
tightness X
50 Lubricate bushings of the RLL turning shaft X
51 Check/adjust wheel-hub drive bearings of FDA X
52 Check clearance spaces in reducing gear flange
bearing of FDA
X
53 Rinse HLL oil tank breather X
54
2)
Clean and lubricate spline joints of FPTO shaft X
55 Check/adjust the clearances between engine
valves and rocking arms X
56 Replace filter cartridge of fine fuel filter X
57
6)
Replace exchangeable filter cartridge of HSC
tank X X
58
6)
Replace exchangeable filter cartridge of HSC
tank X X
59 Change oil in HLL tank X
60 Change oil in HSC tank X
https://tractormanualz.com/