Belarus 1822.3, Руководство оператора

Страница: 18 / 358

2022.3-0000010 OM
17
Table 1.2 finished
Parameter value for the tractor
“BELARUS”
Parameter
(characteristics) title
1822.3/1822 .3 2022.3/2022 .3
20 Electrical equipment as per GOST 3940:
) rated supply voltage in on-board
power system, V
12
b) rated ignition voltage, V 24
21 Hydraulic system:
) pump displacement under crankshaft
rated speed, l/min 53
b) safety valve operation pressure, MPa 20
-2
c) conventional volume factor, not less
than 0,75
22 Working equipment:
) rear power take-off shaft:
rated speed of PTO shaft end exten-
sion in the following modes, rpm:
- stage I 540/540 (under 1929/1475 rpm
of engine crankshaft speed, respectively)
540 (590
6)
) 540 (590/770
6)
)
- II stage 1000/1000 (under 1909/1460
rpm of engine crankshaft speed, respec-
tively) 1000 (1100
6)
) 1000 (1100/1460
6)
)
b) front power takeoff shaft (against or-
der):
rated speed of PTO shaft end extension
(under 2050 rpm of engine crankshaft), rpm -
1000 (1025
6)
)
c) rear lift linkage:
1) loading capacity of rear lift linkage on
suspension axis, kg, not less than 6500
2) time for raising rear lift linkage from
lowermost position into uppermost position
with test load on suspension axis, sec., not
more than
6,5
d) front lift linkage (against order):
-
In section 5 “Cou-
pling of imple-
ments”
e) drawbar hitch: In section 5 “Coupling of implements”
_____________________________________________________________________________________________________________
1)
Engine parameters, not specified in the table 1.2, shall meet 260 S2 – 0000100
document.
2)
For referential use.
3)
For low-speed version of the tractor reverse configuration
4)
When operating in traction-drive mode and speed limit to 15 km/h.
5)
Specified depending on the configuration.
6)
At 2100 rpm of engine crankshaft speed.
https://tractormanualz.com/