Commissioning
EL5101, EL5101-0010, EL5101-0011
108
Version: 4.2
6.2.8
NC configuration
NC configuration – for axis configuration and connection of the EL51x1 in the TwinCAT System Manager
(Config mode) proceed as follows:
Right-click on
NC Configuration - > Append Task
(Fig.
NC Configuration, Append Task
), enter a name for the
task and confirm with
OK
(Fig.
Entering a name for the task and confirming
)
Fig. 132: NC - Configuration, Append Task
Fig. 133: Entering a name for the task and confirming
Right-click on
Axes - > Append Axis
(Fig.
Insert axis
), enter a name, select a type for the axis and confirm
with
OK
(Fig.
Entering a name for the axis and selecting a type
)
