Beckhoff EL1258, Документация

Страница: 177 / 311

Commissioning
EL125x, EL2258 177 Version: 2.5
Index 6pp1 MTI inputs (for 08 ≤ pp ≤ 0F; Ch. 1 to Ch. 8)
Index (hex) Name Meaning Data type Flags Default
6pp1:0 MTI inputs UINT8 RO 0x00 (0
dec
)
6pp1:01 No of input events Signals the number of new timestamps available in the
process image. If three is returned, for example, only
the objects "Input event state 1...3" and "Input event
time 1...3" are valid. UINT8 RO 0x00 (0
dec
)
6pp1:09 Input state Indicates the current input state at the time of the
process data cycle. BOOLEAN RO 0x00 (0
dec
)
6pp1:0A Input buffer overflow More events occurred at the input than elements were
free in the buffer for the channel. BOOLEAN RO 0x00 (0
dec
)
6pp1:0F Input cycle counter Is incremented with each process data cycle and
switches to 0 after its maximum value of 3. BIT2 RO 0x00 (0
dec
)
6pp1:11 Events in input buffer Signals the number of events currently in the buffer. UINT8 RO 0x00 (0
dec
)
6pp1:12 Input order feedback This byte reflects the state of the "Input order counter"
byte
(further explanation see here) [
}
122] .
UINT8 RO 0x00 (0
dec
)
6pp1:21 Input event state 1 Indicates whether the event was a rising (1) or a falling
(0) edge. BOOLEAN RO 0x00 (0
dec
)
6pp1:2A Input event state 10 BOOLEAN RO 0x00 (0
dec
)
6pp1:41 Input event time 1 32-bit timestamp for the corresponding "Input event
state n" UINT32 RO 0x00000000
(0
dec
)
6pp1:4A Input event time 10 UINT32 RO 0x00000000
(0
dec
)
Index 6pp0 TSO Inputs (for 10 ≤ pp ≤ 17; Ch. 1 to Ch. 8)
Index (hex) Name Meaning Data type Flags Default
6pp0:0 TSO Inputs UINT8 RO 0x00 (0
dec
)
6pp0:01 Feedback Indicates the current output state BOOLEAN RO 0x00 (0
dec
)
Index 6pp0 TSI Inputs (for 18 ≤ pp ≤ 1F; Ch. 1 to Ch. 8)
Index (hex) Name Meaning Data type Flags Default
6pp0:0 TSI Inputs UINT8 RO 0x00 (0
dec
)
6pp0:01 Input Current input status BOOLEAN RO 0x00 (0
dec
)
6pp0:09 Status Bit 0: Is set for one cycle if a rising edge was detected.
Bit 1: Is set for one cycle if a falling edge was detected. UINT8 RO 0x00 (0
dec
)
6pp0:41 LatchPos Timestamp of the rising edge UINT64 RO
6pp0:42 LatchNeg Timestamp of the falling edge UINT64 RO
Index F611 DEV Inputs
Index (hex) Name Meaning Data type Flags Default
F611:0 DEV Inputs UINT8 RO 0x00 (0
dec
)
F611:02 Undervoltage Up The nominal voltage at the power contacts was signifi-
cantly below the minimum value. BOOLEAN RO 0x00 (0
dec
)
F611:03 Overtemperature Overtemperature fault: The temperature of the input or
output blocks is too high. For output terminals check
whether one of the channels is affected by a short cir-
cuit. BOOLEAN RO 0x00 (0
dec
)
F611:04 Checksum error An error occurred in the internal data transfer BOOLEAN RO 0x00 (0
dec
)
F611:21 SysTime DC timestamp of the last input mapping. This time-
stamp should not be used as reference
(information
on DC reference times). [ } 133]
UINT64 RO