Baxi LUNA HT 1.280, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 144

5.
Set the required room temperature on the rotating knob of the control unit
6.3 Temperatures for heating
and drinking water
The information in the section Programming for setting the temperatures for hea-
ting and domestic hot water.
Note: The times for DHW will be set in time programme 4/ TWW. For reasons of
comfort, the start of DHW heating should be approximately 1 hour before start of
heating!
6.4 Individual time programme
The gas condensing boiler can be commissioned having its standard values.
For setting e.g. an individual time programme, please observe section Programm-
ing (tab. 5) .
6.5 Instruction for the customer
Instruction
The customer should be instructed in the operation of the boiler and the function
of the safety devices. The following should be pointed out:
- the air inlet must not be restricted;
- flammable materials and liquids must not be stored in the vicinity of the gas
boiler;
- the customer has to carry out the following control checks himself:
- pressure check on the manometer;
- check the discharge from the safety valve;
- only approved gas installers may carry out the inspection and maintenance.
Documents
- The documents, belonging to the boiler, have to be handed over with the instru-
ctions they have to be kept in the installation room of the boiler.
- Copy the commissioning sheet with confirmation and legally binding signature
to the customer. All components have been installed according to the instructi-
on of the manufacturer. The whole plant complies with the relevant British
Standards and current Building Regulations.
Commissioning
358 436 08.10 41