Baxi LUNA HT 1.280, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 144

4. Before installation
4.1 Inlet and outlet air openings
let and outlet air openings are necessary. It has to be checked that these exist and
are fully functional.
Caution! It has to be pointed out to the customer that these inlet and outlet air
openings must always be functional, i.e. they must not be restricted or blocked
and that the inlet area for combustion air at the boiler bottom must be kept free.
4.2 Converting the exhaust and
supply air connection
Exhaust and supply air connection can be converted to adapt to the local conditi-
ons of the installation room.
Converting the exhaust connection
In the following picture the conversion of the top passage to the side or rear passa-
ge of the exhaust connection is represented..
Fig. 3: Conversion of the exhaust connection
1
2
4
5
3
1. Remove lower rear wall (2) of the Power HT
Power HT
2. Remove the gas connection leading upward and make a 87°arc (1)
3. Turn 87°arc (1) in the desired position (side or towards the rear)
4. Remove either the rear cover plate (3) or the side cover plate (4)
Before installation
358 436 08.10 15