Baxi LUNA HT 1.280, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 144

5. Mount lower rear wall (2)
6. Glue upper cover plate (5)
Converting the supply air connection
In the following picture the conversion of the top passage to the side or rear passa-
ge of the supply air connection is represented.
Fig. 4: Conversion of the supply air connection
Side supply air connection (A)
1. Remove lower rear wall (5) of the Power HT
2. Loosen screws and remove the cover plate (2)
3. Remove the intake pipe leading upward from the intake pipe elbow (6)
4. Turn intake pipe elbow (6) into the side position
5. Mount lower rear wall (5)
6. Close top supply air opening acc. to Fig. 3 with cover plate (1)
Rear supply air connection (B)
1. Remove lower rear wall (5) of the Power HT
2. Take out cover plate (4) from lower rear wall (5)
3. Remove the intake pipe leading upward with intake pipe elbow
4. Mount straight intake pipe (3)
5. Mount lower rear wall (5)
6. Close top supply air opening acc. to Fig. 3 with cover plate (1)
Before installation
16 358 436 08.10
1
2
3
1
2
3
A B