Baroness GM2810, Руководство по обслуживанию

Страница: 66 / 185

Caution
Before starting pressure measurement, make
sure that there are no people around the
machine.
Remove the hydraulic hose from the elbow
attached to the cylinder.
3
2
1
9idjnn-006
Steering Circuit_002
1 Cylinder
2 Elbow
3 Hydraulic hose
Install the pressure gauge for low pressure
measurements between the removed hose
and elbow.
1
2
3
9idjnn-007
Steering Circuit_003
1 Hydraulic hose
2 Elbow
3
Pressure gauge for low pressure
measurements
Make sure that the parking brake is applied,
and then start the engine and rev it up to the
maximum rpm.
The normal pressure is 6.9 MPa (1,000.73
psi) when the handle is turned rightward
completely.
1.
2.
3.
Items to Prepare for Measurement
Prepare a pressure gauge for low pressure
measurements, T-joint TEF1/4, 6 adapter,
and 6 hydraulic hose.
10
20
30
15
25
35
5
1 2
4
2
3
2
z4kw7w-043
Steering Circuit_004
1 6 Hydraulic hose
2 6 Adapter
3
Pressure gauge for low pressure
measurements
4 T-joint TEF1/4
4.
GM2810
Hydraulic system
Page 4-38
Measurement