Baroness GM2810, Руководство по обслуживанию

Страница: 90 / 185

Adjustment
Proximity Sensor
Start the engine, raise mower units #1, #4,
and #5 by 30 cm (11.81 in), and then turn off
the engine.
Warning
Be sure to stop the engine before adjusting
the proximity sensor.
Warning
Do not crawl under the mower units.
Turn the key switch ON (the engine remains
stopped); turn the rotary knife rotation switch
ON; and then lift up mower unit #5 by 40 cm
(15.75 in) by hands.
1
2
3 4
iqcb8b-001
Proximity Sensor_001
1 Setting value 30cm (11.81 in)
2 Setting value 40 cm (15.75 in)
3 Mower unit #4
4 Mower unit #5
1.
2.
Caution
See the list in "Tightening torques" (Page
3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening, etc.
Loosen two bolts, slide the switch mounting
board slowly until the illuminated proximity
sensor on the switch mounting bracket turns
off. Then, fasten the board using the two
bolts.
1
4
2 3
iqcb8b-002
Proximity Sensor_002
1 Proximity sensor
2 Bolt
3
Long hole (for adjusting the proximity
sensor)
4 Switch mounting board
Adjust the proximity sensor for mower unit
#4 by the same procedure.
3.
4.
GM2810
Electrical system
Page 5-8
Adjustment