Baroness GM2810, Руководство по обслуживанию

Страница: 139 / 185

Mower Units #4/#5
Start the engine, and then raise the mower
units.
1
yze531-002
Mower Units #4/#5_001
1 Mower unit
Stop the engine, and then remove the key.
Remove the cotter pin and hardened
roundhead pin inserted at a, and then
insert them at c.
1
2
a
b
c
ahk5df-002
Mower Units #4/#5_002
1 Cotter pin
2 Hardened roundhead pin
Follow the steps below to remove the
rotary knife.
Use the square pipe from the included
tools to secure the rotary knife so that it
does not turn.
Remove the two bolts, spring washers
and washers used to install the rotary
knife.
Remove the knife guide.
￭
1.
2.
3.
4.
[1]
[2]
[3]
Remove the rotary knife.
1
6
2
3
4
5
to41g1-007
Mower Units #4/#5_003
1 Square pipe
2 Rotary knife
3 Bolt
4 Spring washer
5 Washer
6 Knife guide
Important
The tightening torque for the knife mounting
bolt is 67 - 85 N-m (683.20 - 866.75 kgf-cm).
Install the rotary knife.
For installing the rotary knife, reverse the
removing procedure.
[4]
5.
Operating Machine and Mower Units
GM2810
Operating Machine and Mower Units
Page 7-21
Inspection and repair of each section