Bard Site-Rite IV, Руководство пользователя

Страница: 16 / 36

­ ­
Site~Rite* IV Ultrasound System Operator’s Manual
Chapter 4: Site~Rite* IV Scanner
4.3 Setting the Time, Date, and Date Format
The Site~Rite IV Scanner displays the current date and time in the upper right-hand corner of the
screen. The time displays in 24-hour format.
To set the current date and time,
1. Press the Freeze button.
The image on the screen freezes.
2. Simultaneously press the Depth
Selection and Image Reversal buttons.
New functions display on the screen.
The first number of the time in the
upper right-hand corner is highlighted.
3. To change the highlighted number,
press the Brightness Increase button to
increment the value by one or press the
Brightness Decrease button to decrement the value by one.
4. When the highlighted number is correct, press the Gain Increase button to move the cursor
to the next value to the right or the Gain Decrease button to move the cursor to the next
value to the left.
5. To move the cursor to the desired location, press the Gain Increase or Gain Decrease button
repeatedly.
6. Repeat steps 3 - 5 until the desired date and time are set.
7. To change the date format, press the Dot Marker button until the desired date format
displays on the left-hand side of the screen. The default date format is mm/dd/yy.
8. To save the changes, simultaneously press the Depth Selection and Image Reversal buttons.
9. Press the Freeze Frame button to return to real-time imaging.
The time, date, and date format settings are saved.
If you entered an invalid time or date, “Invalid Time” or “Invalid Date” displays beneath the time and
date, and the scanner remains in edit mode.
Note: When in the screens to change the day and time; to discard the changes made
to the time and date, press the Freeze Frame button before saving the changes.
The date format does not change.
4.4 Using the Video Out Feature
On the back of the Site~Rite IV
Scanner is a video out port. You
can use the video out feature to
connect the Site~Rite IV Scanner
to third party video equipment,
such as a larger monitor.
The video out port is a standard
BNC plug. The plug is covered
with a twist-off cap to protect it
when not in use.
The Site~Rite IV Scanner’s video
out format is configured to be
NTSC compatible.
Note: You must follow any local safety requirements when attaching non-Bard Access Systems'
manufactured accessories.
Caution: Only accessories that are approved for use by country and local authorities are to be
connected to the Site~Rite IV Scanner. Use of accessories that are not compliant to
International Electrical Safety Standards may result in device failure.