Bard MULTI-TEC W24AAPA, Руководство по установке

Страница: 63 / 88

Manual 2100-676B
Page 63 of 88
FIGURE 13
Wire Routing
breaker boot. This allows unit power to be disconnected
without panel removal.
Route all field power wires in channel under the
control panel as shown in Figure 13. See Figure 14 to
reference VAC landing points.
LOW VOLTAGE
COMMUNICATION
WIRE ENTRANCE
HIGH VOLTAGE
POWER WIRE
ENTRANCE
MIS-3927
FIGURE 15
Side Communication and Power Wire Entrances (Recommended)
FIGURE 14
VAC Supply Wiring Landing Points
Route wires into unit through recommended side
entrances (see Figure 15). Optional rear entry points
are also available (see Figure 16 on page 64).
When running wires to unit from shelter, be careful to
not place wiring and conduit where it will interfere with
opening filter access doors.