Bard MULTI-TEC W24AAPA, Руководство по установке

Страница: 22 / 88

Manual 2100-676B
Page 22 of 88
Model
Rated
Volts &
Phase
No.
Field
Power
Circuits
Single Circuit Dual Circuit

Minimum
Circuit
Ampacity

Maximum
External
Fuse or
Ckt. Brkr.

Field
Power
Wire
Size

Ground
Wire

Minimum
Circuit
Ampacity

Maximum
External Fuse or
Ckt. Breaker

Field Power Wire
Size

Ground
Wire Size
Ckt.
A
Ckt.
B
Ckt.
C
Ckt.
A
Ckt.
B
Ckt.
C
Ckt.
A
Ckt.
B
Ckt.
C
Ckt.
A
Ckt.
B
Ckt.
C
W36AAEA15 230/208-1 1 or 2 104 110 2 6 52 52 60 60 6 6 10 10
W36AAEB15 230/208-3 1 or 2 66 70 4 8 21 48 30 50 10 8 10 10
W36AAEC15 460-3 1 34 35 8 10
W48AAEA15 230/208-1 1 or 2 110 110 2 6 58 52 60 60 6 6 10 10
W48AAEB15 230/208-3 1 or 2 69 70 4 8 24 49 30 50 10 8 10 10
W48AAEC15 460-3 1 34 35 8 10
W60AAEA15 230/208-1 1 or 3 114 120 2 6 36 52 52 40 60 60 8 6 6 10 10 10
W60AAEB15 230/208-3 1 or 2 72 80 4 8 26 50 30 50 10 8 10 10
W60AAEC15 460-3 1 36 40 8 10
W72ABEA15 230/208-1 1 or 3 134 140 1/0 6 58 52 26 60 60 30 6 6 10 10 10 10
W72ABEB15 230/208-3 1 or 2 83 90 4 8 38 52 40 60 8 6 10 10
W72ABEC15 460-3 1 40 45 8 10

These “Minimum Circuit Ampacity” values are to be used for sizing the field power conductors. Refer to the National Electrical code
(latest version), Article 310 for power conductor sizing.

Maximum size of the time delay fuse or circuit breaker for protection of field wiring conductors.

Based on 75°C copper wire. All wiring must conform to the National Electrical Code and all local codes.
CAUTION: When more than one field power circuit is run through one conduit, the conductors must be derated. Pay special attention to
note 8 of Table 310 regarding Ampacity Adjustment Factors when more than three (3) current carrying conductors are in a
raceway.
IMPORTANT: While this electrical data is presented as a guide, it is important to electrically connect properly sized fuses and conductor
wires in accordance with the National Electrical Code and all local codes.
TABLE 3
Electrical Specifications
–
W**A*E Series