Barco MXRT-7600, Руководство пользователя

Страница: 38 / 60

K5905271 /16 Display Controller
38
5.11 SingleView ™
5.11.1 Description
Overview
SingleView enables the use of a Coronis Fusion display as a single display in the Windows desktop and
eliminates any tearing down the center.
Image 5-12
Supported displays
When driven by an MXRT-x400 or later display controller, SingleView is supported on all Coronis Fusion
displays.
5.11.2 Operation
Using SingleView
A button will switch all Coronis Fusion displays into SingleView , and another will switch all into DualView .
Hotkeys are available for both actions.
When in SingleView , it is possible to have the left and right halves out of position, and a button will swap the
two.
DualView is the preferred setting for most PACS application software.
5.11.3 Configuration
Configuring SingleView
• Enable SingleView: This check box will toggle between SingleView and DualView .
• Swap Left/Right: This can correct misaligned SingleView displays one at a time.
• Hotkeys: SingleView and DualView activations have individual hotkeys. Click Clear to remove a hotkey.
Click on the hotkey box to enter a new one.
5.12 SmartCursor ™
5.12.1 Description
Overview
The Barco SmartCursor feature prevents the cursor from becoming stuck on edges of adjacent displays of
different sizes.
Image 5-13
Supported display controllers
SmartCursor is supported by all systems with an MXRT-x400 or later display controller.
Driver and Intuitive Workflow Tools