Barco MXRT-7600, Руководство пользователя

Страница: 14 / 60

K5905271 /16 Display Controller
14
Barco dongles are available for purchase independently.
2.5.1 Passive Single-Link Dongle
About
The passive Single-Link Dongle converts DisplayPort input signals to single-link DVI output signals. It is
compatible with all Barco grayscale displays and up to 2MP color models. For color displays of 3MP and
greater resolutions, the Dual-Link Dongle is necessary.
Image 2-9: Single-Link dongle
1. To display Single-Link DVI cable
2. To DisplayPort connector on Barco Display Controller
2.5.2 Active Single-Link Dongle
About
Barco Display Controllers are not compatible with third-party active single-link dongles. Please use Barco
passive Single-Link dongles.
2.5.3 Active Dual-Link Dongle
About
The active Dual-Link Dongle converts DisplayPort input signals to dual-link DVI output signals. Unlike the
passive Single-Link dongle, the Dual-Link dongle allows higher resolutions (greater than 1920x1200) on color
displays.
When using QAWeb software for calibration and quality assurance of a display connected through a
Dual-Link dongle, a USB cable must also be connected to the display.
Image 2-10: Dual-Link dongle
1. To computer's USB port
2. To display via DVI Dual-Link cable
3. To DisplayPort connector on Barco Display Controller
2.6 Shipping the Barco Display Controller
About
After the installation and validation of software components, Barco recommends removing the display
controllers from the workstation and returning them to their original packaging prior to shipment.
Barco does not recommend shipping display controllers installed in the workstation.
Display Controller installation