Barco MXRT-7600, Руководство пользователя

Страница: 48 / 60

K5905271 /16 Display Controller
48
拧
Screw
○ ○ ○ ○ ○ ○
備考 1. 〝超出 0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用物質之百分比含量超出百分比含量基準值
Note 1 ：“ Exceeding 0.1 wt % ” and “ exceeding 0.01 wt % ” indicate that the percentage content of the
restricted substance exceeds the reference percentage value of presence condition
備考 2. 〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值
Note 2 ：“○” indicates that the percentage content of the restricted substance does not exceed the percentage
of reference value of presence.
備考 3. 〝－〞係指該項限用物質為排除項目
Note 3 ： The “−” indicates that the restricted substance corresponds to the exemption
6.3 Regulatory compliance information
The Intuitive Workflow Tools (SpotView, I-Luminate, Film Clip and Application Appearance Manager
(AAM)) are pending medical device clearance and are currently not available in all markets.
Intended use
The Intuitive Workflow Tools (SpotView, I-Luminate, Film Clip and Application Appearance Manager (AAM))
are intended to be used as accessories for image enhancement in diagnostic displays.
Intended conditions for use
There are no specific intended conditions for use.
Contra-indications
Not applicable.
Intended users
The Intuitive Workflow Tools are intended to be used by trained medical practitioners.
Manufacturing country
The manufacturing country of the product is indicated on the product label ( “ Made in …” ).
Importers contact information
To find your local importer, contact one of Barco ’ s regional offices via the contact information provided on our
website ( www.barco.com ).
FCC class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important information