manualshive.com logo in svg

Banner iVu Plus TG Series, Инструкция по эксплуатации

Поделиться
Скачать
Banner iVu Plus TG Series Скачать руководство пользователя страница 78

12.3 Communication Logs Menu

Main Menu > Logs > Communication Logs
The Communication Log contains logs for the four communications channels: Industrial Ethernet, Command Channel, Data

Export, and Image Export.
The following features are available for each of the logs:

• Click the icon in the upper left corner of the screen to show/hide the time column

• Click Clear Log at the bottom of the screen to clear the log

• Click Save to save the Log to the USB flash drive

Note: Communication log does not log changes while in Demo mode. Additionally, the Emulator does not
log changes.

Figure 96. Communications Logs Menu

12.3.1 Industrial Ethernet Log

Main Menu > Logs > Communication Logs > Industrial Ethernet Log
The Industrial Ethernet Log includes the most recent Industrial Ethernet activity.

12.3.2 Command Channel Log

Main Menu > Logs > Communication Logs > Command Channel
The Command Channel Log includes the most recent Command communication activity. Each entry in the log includes a

status indicator for the operation. A green indicator displays when the channel is enabled or disabled—light green when the

channel is enabled and dark green when the port is disabled.
An up-arrow displays for incoming requests from a remote device. A down-arrow displays for outgoing responses from the

iVu. The up- and down-arrows are green when everything is okay and red if there is an error. The up-arrow is yellow if the

command is incomplete (for example, waiting for an end-of-frame delimiter).

Note: An hourglass displays if an operation takes a particularly long time to complete, for example, during
a long trigger.

Each log entry includes a log detail button (arrow icon on right side of log entry) to display a detail view of the log entry. Use

the buttons at the bottom of the screen to refresh the display and to clear the log. Save the communication log to the USB

flash drive so that the communication log can be imported to the emulator.

iVu Plus TG and Color Gen2 Image Sensors

 

 

78

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Содержание iVu Plus TG Series


















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды