Bandai Namco MAXIMUM TUNE 5DX PLUS, Руководство по эксплуатации

Страница: 91 / 186

8A-7 Setting the pCb ID
When connecting two to four machines to the Wangan Terminal for communication-linked VS player game play,
follow these directions.
1
Use the supplied service key to open the service door. (See “7-5 Opening and Closing the Service
Door” on page 30.)
2
When the Test switch is set to ON, the MENU screen appears on the monitor. (See “7-6-2
Adjustment Switches” on page 32.)
3
Flip the Select switch up or down to select GAME OpTIONS and press the Enter switch to display
the GAME OpTIONS screen.
GAME OPTIONS screen
GAME OPTIONS (DRIVER UNIT)
[DEFAULT IN GREEN]
RESPONDING DRIVER UNITS <
４
>
EXIT
SELECT SWITCH : SELECT ENTER SWITCH :
IC CARD R/W USE
： ＯＮ
IC CARD VENDOR USE
： ＯＮ
STEERING POWER ： ＯＮ
WINS AND REMAINS
： ＯＮ
PCB ID
： １
ERROR: PCB ID CONFLICT CHANGE ID SETTING IN TEST MODE
(COLLECTIVE WANGAN TERMINAL SETTINGS)
<BECOMES USABLE WHEN TEST SWITCH IS OFF>
（ｂ）
（ａ）
4
Check that (a) rESpONDING DrIVE UNITS matches the number of actually connected Driver
Cabinets with the power turned on.
5
Set (b) pCB ID to “1,” “2,” “3” and “4” in order from the leftmost Cabinet.
* The default setting is “1” for all Cabinets.
* If more than one Driver Cabinet has the same pCB ID, an error message appears.
6
Set the Test switch to OFF and close the service door.
8A. Installation and Assembly
89
Installation
and Assembly
- Must be performed by a technician -
1
2
3
4
5
6
7
8A
8B
9
10
11
12
Test Mode
Troubleshooting
WMT5DX取扱説明書_EN.indb 89 16/03/22 19:54