Bandai Namco MAXIMUM TUNE 5DX PLUS, Руководство по эксплуатации

Страница: 116 / 186

z z
To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
circuits, be sure to turn off the power switch before starting work.
z z
pC boards are sensitive to static electricity. If a person handles a pC board while
charged with static electricity, the parts on the pC board may be damaged. before
handling a pC board, discharge the static electricity from your body; for example, by
touching the surface of grounded metal.
1
Turn off the power switch. (See “7-6-1 Turning the power Switch On” on page 31.)
2
remove the service door. (See “8B-3-2 (1) removing and Installing the Service Door” on page
106.)
3
Disconnect the four connectors.
4
Open the levers at the tips of the four edge supports, and replace the D2 Amp pC board.
D2 Amp PC board
Edge support
<To install>
<To remove>
Click
D2 Amp PC board
Connector
Connect the connecters to the D2 Amp PC board connectors
with the same marking color.
5
To install, align the holes of the D2 Amp pC board with the edge supports, and press in the pC
board firmly until it clicks into place.
z z
After replacement, be sure to check the D2 Amp pC board connections. (See “7-8-8
volume Adjustment (SOUND TEST)” on page 51.)
8b. Service
114
- Must be performed by a technician -
WMT5DX取扱説明書_EN.indb 114 16/03/22 19:54