PAGE 50
Step 28
Place one Slide Rail on a flat surface and begin inserting Slide Bed at the bottom of the Slide Rail. Put Slide Support
Bottom into the support pocket at the bottom of Rail and have a helper bend the Slide Bed towards the top of the Slide and
insert the Bed into the cavity. Make sure bed is completely down in the Slide cavity.
Place the other Slide Rail on a flat surface with the Slide cavity up. Have a helper hold the top end of Slide Bed
and begin inserting the Slide Bed and Slide Support W100935 into it's cavity and four
A100034 Slide Support
Tubes
into their pockets starting at the bottom of Slide and working up to the top.
Once Bed and Supports are completely in the cavity and in the support pockets, secure using 3” Deck Screws
at each of th 30 pilot hole locations as shown below.
( Note: Retain your left over hardware,
It will be required to attach the Slide to the Fort. )
