A50
Step 24
Attach
E51Swing Beam Angle Braces
to
SP50 Swing Beam Support
using 5/16” x 6 ½” Bolt, Lock Washer and
5/16” Spike T Nut.
Attach
G50 Swing Beam Ground Board
to E51Angle Braces with 5/16” x 2” Bolts, Lock Washers, 5/16” x 7/8”
Barrell Nuts and Lock Washers.
Attach
E50 Swing End Support
to E51Angle Braces using 5/16” x 2-½” Bolts, Lock Washers and 7/8” Barrel Nuts
and Lock Washers and to SP50 with 5/16” x 2 ½” Lag Screws and Lock Washers.
Attach
A100019 Triangle Plate
to SP50 Swing Beam Support using 5/16” x 4” Bolts, Fender Washers and 5/16”
Lock Nuts
.
Attach
A100004 Swing Beam Brackets
to
A50 Swing Beam
using 5/16” x 4” Bolts, Fender Washers and 5/16”
Lock Nuts.
Attach four
A100046 Swing Hangers
to Swing Beam using 3/8” x 5-¾” Hex Head Bolts, Lock Washers , Flat
Washers and 3/8” Spike T Nuts.
Attach
Y25-G Glider Supports
to Swing Beam using 5/16” x 5-¾” Bolts, Lock Washers, Fender Washers and Lock
Nuts.
Attach Swing Beam End assembly to Swing Beam with 5/16” x 4” Bolts, Fender Washers and 5/16” Lock Nuts.
Attach Swing Beam assembly to G5 Swing Beam Mount using 5/16” x 1-¼” Hex Head Bolts, Split Washers and
Fender Washers into Spike T Nuts installed earlier.
ITEMS NEEDED
2-E51 Swing Beam Angle Braces
1-SP50 Swing Beam Support
1-G50 Swing Beam Ground Board
1-E50 Swing Beam End Support
1-A50 Swing Beam
2-Y25-G Glider Supports
4-A100046 Ductile Hanger Kit w/clips and Covers (Swing Hangers)
2-A100019 Triangle Plates
2-A100004 Swing Beam Brackets
1-5/16” x 6 ½” Bolt
1-5/16” Spike T Nut
9-Lock Washers for Bolts
2-5/16” x 2 ½” Bolts
6-5/16” x 4” Bolts
10-5/16” Lock Nuts
16-Fender Washers
4-5/16” x 1 ¼” Hex Type Bolts
2-5/16” x 2 ½” Lag Screws
4-5/16” Flat Washers
6-5/16 Split Washers
HARDWARE NEEDED
A100005
A50
Use any convenient
long 5/16" bolt.
5 ¾” WHA Bolt
Lock Washers
& Fender Washers
Fender Washers
Nuts
Lock
SP50
E51
E51
G50
E50
G5
PAGE 46
8-3/8” x 5 ¾” Hex Type Bolts
8-3/8” Spike T nuts
8-3/8” Flat Washers
8-3/8” Lock Washers
4-5/16” x 5 3/4” Bolts
4-5/16” Barrel Nuts
A100004
