Bacharach H25-IR PRO, Руководство пользователя

Страница: 71 / 128

H25-IR PRO Instruction Manual Operation
P/N: 3015-5678 Rev 6 61
NOTE: When Feedback is set to SETPOINT, the audio alarm only occurs when the sampled gas level is at or above
the defined Alarm Setpoint value. When set to CONTINUOUS, the audio alarm will sound for any non-zero gas
sample. In CONTINUOUS mode, the pitch of the audio alarm will increase and decrease based on the leak rate
of the sampled gas.
NOTE: To return to the Advanced Setup, press the ESC button.
NOTE: From the main Search or Measure screen, use the ENT + SETUP button combination to activate one of
the pre-defined User Setups (1-4).
NOTE: When a custom setup is active, the name of the setup appears at the bottom of the screen next to the
SEARCH / MEASURE indication.
5.6.2. Relay Settings Screen
The relay settings screen defines how each of the H25-IR Pro’s four relays function—specifically, when (if) they energize.
NOTE: Be sure to read the Relay Connections section in Chapter 4, and properly wire your relay connection(s)
for the desired results.
Table 5-20. Accessing the RELAY SETTING Screen
Step Button Description Sample Screen(s)
1 See Table 5-14
on page 53.
Follow the steps in Table 5-14
on page 53 to access the Relay
Settings option.
2
Press the Up Arrow and Down
Arrow buttons to select the
desired relay (1-4).
<< ADVANCED SETUP >>
USER SETUPS 1-4
RELAY SETTINGS
MEASUREMENT LOG
DATE/TIME SET
LOG LIMIT ¯
qp
SELECT ± EDIT
RELAY SETUP
CLOSE 1 NEVER
CLOSE 2 NEVER
CLOSE 3 NEVER
CLOSE 4 NEVER
qp
SELECT ± EDIT