Bacharach H25-IR PRO, Руководство пользователя

Страница: 38 / 128

Menu System Overview H25-IR PRO Instruction Manual
28 P/N: 3015-5678 Rev 6
NOTE: The right arrows in the header of the Advanced Setup screen indicate the existence of an additional
“tabbed” menu to the right (and the key to press in order to access it). Similarly, the left arrows show how to
return to the Basic Setup screen.
NOTE: The function of the probe button located on the standard probe can be set through the Probe Button
setting of the Advanced Setup menu. The Probe Button setting (see Figure 5-10 above) is only present (at the
bottom of the Advanced Setup menu) if a Smart Probe is not automatically detected. Refer to section 5.6.8:
Probe Button (on page 71) for more information.
3.9. Diagnostics Screen
The Diagnostics screen contains advanced system details used for identifying faults, troubleshooting, and maintenance. To
access the Diagnostics screen from the Search Mode screen or Measure Mode screen:
•
Press the SETUP button once to reach the Basic Setup menu, then press the SETUP button two more times (as the
Right Arrow button), or
•
Press the Info (
i
) button.
Figure 3-13. Diagnostics Screen
The Diagnostics screen contains the following options:
• Current Faults menu (lists currently active fault codes) with 4-digit fault code summary)
• Sensor Data menu (parameters for the NDIR sensor, used for troubleshooting and maintenance)
•
Menu identifier located in the banner line (DIAGNOSTICS in this example)
•
Left arrows in the banner line that indicate one or more additional menus (use the left arrow key to access)
•
Command options in the footer line (in this case, the keys to press to select and edit menu items)
NOTE: Pressing the ENT button when the Current Faults menu item is selected interrogates the faults and
provides you with fault details.
Ñ Ñ Ñ
<< DIAGNOSTICS
CURRENT FAULTS 0000
SENSOR DATA
qp SELECT ± EDIT