Bacharach H25-IR PRO страница 2 Скачать руководство пользователя

Страница: 2 / 128

H25-IR PRO Instruction Manual

P/N: 3015-5678 Rev 6

WARRANTY

Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in material and

manufacture and will conform substantially to Bacharach Inc.'s applicable specifications. Bacharach's liability and Buyer's

remedy under this warranty are limited to the repair or replacement, at Bacharach's option, of this Product or parts thereof

returned to Seller at the factory of manufacture and shown to Bacharach Inc.'s reasonable satisfaction to have been defective;

provided that written notice of the defect shall have been given by Buyer to Bacharach Inc. within two (2) years after the date

of delivery of this Product by Bacharach, Inc.

Bacharach, Inc. warrants to Buyer that it will convey good title to this Product. Bacharach's liability and Buyer's remedy under

this warranty of title are limited to the removal of any title defects or, at the election of Bacharach, to the replacement of

this Product or parts thereof that are defective in title.

The warranty set forth in paragraph 1 does not apply to parts the operating instructions designate as having a limited shelf-

life or as being expended in normal use (e.g., filters).

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF:

(I)

ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE: AND

(II)

ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT, WHETHER OR NOT ARISING

FROM BACHARACH'S NEGLIGENCE, ACTUAL OR IMPLIED.

The remedies of the Buyer shall be limited to those provided herein to the exclusion of any and all other remedies including,

without limitation incidental or consequential damages. No agreement varying or extending the foregoing warranties,

remedies or this limitation will be binding upon Bacharach, Inc. unless in writing, signed by a duly authorized officer of

Bacharach.

Register your warranty by visiting www.mybacharach.com.

NOTICE

Product improvements and enhancements are continuous, therefore the specifications and information contained in this

document may change without notice. Bacharach, Inc. shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may

be photocopied, reproduced, or translated to another language without the prior written consent of Bacharach, Inc.

Revision 6 of this manual corresponds to firmware version 1.20 or newer.

Patent 6,590,690. Other patents pending.

BACHARACH

is a registered trademark of Bacharach, Inc. All other trademarks, trade names, service marks and logos

referenced herein belong to their respective owners.

Содержание H25-IR PRO

































































































































Результаты поиска

Содержание H25-IR PRO

Отзывы:

Похожие инструкции для H25-IR PRO

Бренды по названию

Популярные бренды

Bacharach H25-IR PRO, Руководство пользователя

Результаты поиска

Содержание H25-IR PRO

Отзывы:

Похожие инструкции для H25-IR PRO

Бренды по названию

Популярные бренды