Bacharach H25-IR PRO, Руководство пользователя

Страница: 98 / 128

H25-IR PRO Instruction Manual Maintenance
P/N: 3015-5678 Rev 6 88
CHAPTER 6: MAINTENANCE
IN THIS SECTION
• Fuse Replacement .................................................... 88
•
Probe Tip Filter Replacement .................................... 89
•
Probe “O” Ring Replacement .................................... 90
•
External Filter Replacement ...................................... 90
• IR Sensor Replacement ............................................. 92
•
IR Sensor Adjustment ............................................... 95
•
Spare Parts and Accessories ...................................... 95
•
Firmware Upgrade Procedure ................................... 96
6.1. Fuse Replacement
Table 6-1. Items Required for Fuse Replacement
Item Description
1 Small flat-blade screwdriver
2 Fuse
NOTE: A spare fuse is located in the fuse holder.
Table 6-2. Fuse Replacement Procedure
Step Description
1 Remove power cord from back panel.
2 Locate fuse compartment.
3 Using a small, flat-blade screwdriver, carefully pry out the fuse holder from the fuse compartment.
4 Inspect the fuse for damage or check its continuity. Remove and discard blown fuse.
5 Use screwdriver to carefully slide out back-up fuse from storage compartment.
6 Move back-up fuse into fuse holder.
7 Replace fuse compartment (flush with back panel to ensure seated properly).
8 Replace power cord.
9 Supply power and turn on the unit to verify operation.
10 Replace the spare fuse as soon as possible with the same type and rating. Refer to Spare Parts and Accessories
on page 95 for the part number.