Bacharach H25-IR PRO, Руководство пользователя

Страница: 47 / 128

H25-IR PRO Instruction Manual Operation
P/N: 3015-5678 Rev 6 37
5.3.3. Mode Button
During search mode operation, it may be desirable (after locating the source of the refrigerant gas
leak) to quantify or measure the extent of that leak. This is accomplished by switching the H25-IR
PRO from the Search Mode screen to the Measure Mode screen using the MODE button.
NOTE: The MODE button toggles the H25-IR PRO between search mode (locating the
leak source) and measure mode (quantifying the leak). The Search Mode screen and
Measure Mode screen are displayed, respectively.
In Figure 5-2, notice the differences between the Search Mode screen and the Measure Mode screen. The H25-IR PRO in
Figure 5-2 is configured for graphic display style. The H25-IR PRO in Figure 5-3 is configured for numeric display style. Refer
to Display Style on page 51 for additional information.
Figure 5-2. Toggling Between Search Mode and Measure Mode (Example 1)
Figure 5-3. Toggling Between Search Mode and Measure Mode (Example 2)
NOTE: Regardless of the display style that is selected (graphic display or numeric display), numeric display is
always used exclusively in measure mode.
GAS TYPE = R134A
0
20.0
ALARM >= 10.0 G/YR
SEARCH {---------}
GAS TYPE = R134A
ALARM
>=
10.0
RANGE = 0-20 G/YR
MEASURE {---------}
GAS TYPE = R134A
ALARM
>=
10.0
RANGE = 0-20 G/YR
SEARCH {---------}
GAS TYPE = R134A
ALARM
>=
10.0
RANGE = 0-20 G/YR
MEASURE {---------}