Intel 810 Baby AT Mainboard
AWARD BIOS SETUP
4-8
Memory Hole At 15M-16M:
( default setting : “Disabled” )
In order to improve performance, certain space in memory can be reserved for ISA
cards. Such memory must be mapped into the memory space below 16 MB.
Enabled
Memory hole supported.
Disabled
Memory hole not supported.
Delayed Transaction
( default setting : “Enabled” )
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select Enabled to support compliance with PCI specification
version 2.1..
The Choice: Enabled, Disabled.
On-Chip Video Window Size : (
default setting: 64MB )
This mainboard provides the most DVMT technology (Dynamic Video Memory
Technology) and it will increase the video display performance. There is the AGP
VGA interface on this mainboard and the AGP display card will use some of the
system memory to store 3D texture mapping data to increase the video display
performance. You may use this field to define the memory size which you prefer to
use for the AGP card. The memory size selectable in this field can be "Disable" or
64MB DVMT. When you select 64MB DVMT, it does not mean that the PC system
will use that much memory. Then memory size defined in this field will be the
maximum memory which Windows 95/98 can use to story the 3D texture.
When you select the 64MB DVMT, you will see 1024K memory is allocated as the
share memory when you power on the PC system. When you start the Windows
operation system, Windows will allocate the required display share memory
dynamically.
If you select disable, the onboard VGA interface will be
disabled. Since there is no AGP slot on the mainboard, so you
will have to install a PCI VGA card. Otherwise, there will be no
display to your PC system.
